STARTING NX8.0 SESSION AND OPENING FILES
From the window desktop screen, click on Start=>All Apps=>Siemens NX8.0=>NX8.0
After chickening on NX8.0, the main screen will open.
This is the Gateway for the NX8.0 software. Below is the image of Screen. The
Gateway also has a Ribbon Bar that will allow you to create a New File or Open an
existing file. Left side of the Gateway Screen, there is a Tool Bar called as Resource Bar that
has menus related to different modules and the ability to define and change the
Role
of the Software, History, Part Navigator, Assembly Navigator
and so on.
Open
a New file
After clicking on OK, a new window will be open
like below image. This window will allow you to access so many no. of commands directly
and provide you the working place
WCS (Work Coordinate system)-
Absolute CSYS-
On the Ribbon Bar,
under the File
tab found at the top-left of the screen, go to FILE=>NEW
This
will open a new session, asking for the name and location of the new file to be
created as shown at the below image. And you need to select the units (inches
or millimeters) of the working environment by clicking on the drop-down menu on
the top right corner.
WCS (Work Coordinate system)-
WCS
is use for construction when you want to determine orientations and angles of
features. The axes of the WCS are denoted XC, YC, and ZC. (Here “C” stands for “Current”).
Absolute CSYS-
This is fixed
coordinate system. Absolute coordinate System is use for provide common frame
of reference between part files. An Absolute position at X=1, Y=1 and Z=1 in
one part file in the same location in any other part file as well.
Comments
Post a Comment